Advertising
Behringer XENYX 1202 12 INPUT 2 BUS MIC LINE MIXER
Premium 12-Input 2-Bus Mixer with XENYX Mic Preamps, British EQs and Multi-FX Processor
Information of seller
local_shipping ဤစာမ်က္နွာရွိ ပစၥည္းမွာ Pre-order ျဖစ္ပါက ႀကိဳတင္ေငြ % အနည္းငယ္ ျဖင့္ မွာယူ၀ယ္နိဳင္ၿပီ။
In-Store Advertising
Studio-Grade XENYX Mic Preamps
The XENYX mic preamps incorporated in the Behringer 1202FX mixer are renowned for their sonic performance, high quality and outstanding clarity. Offering an impressive 130 dB of dynamic range and a bandwidth that ranges from below 10 Hz to above 200 kHz, the XENYX preamps deliver high level outputs with a focus on clarity and power. The XENYX preamps are ideal for studio recording and live purposes, giving you an array of recording possibilities while maintaining the rich sonic qualities required for professional audio.
Built-In Digital Multi-FX
Equipped with Behringer's studio-quality 24-bit multi-FX processor, the XENYX 1202FX mixer provides you with 100 mind-blowing digital effect presets such as delay, chorus and reverb. You then have the ability to apply them to any channel, as well as to the monitors and main output. Additionally, the 1202FX allows you to integrate all of your existing outboard equipment - bypassing the built-in FX processor.
Sublimely Musical British EQ
British mixing consoles have long been known for their analog warmth and overall quality recordings. Based on these vintage mixing consoles, Behringer have incorporated the same style circuitry on the channel EQ. This results in incredibly warm and detailed audio, delivering rich sonic qualities associated with the old British mixing consoles.
Features
- Premium ultra-low noise, high headroom analog mixer
- 4 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
- Neo-classic "British" 3-band EQs for warm and musical sound
- Studio-grade stereo FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
- FX send control per channel for internal FX processor and/or as external send
- Main mix outputs plus separate control room, phones and stereo CD/tape outputs
- CD/tape inputs assignable to main mix or control room/phones outputs
- Long-wearing 60-mm logarithmic-taper fader and sealed rotary controls
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by Behringer Germany
Microphone Inputs (XENYX Mic Preamp)
- Microphone Inputs Type
- XLR connector, electronically balanced, discrete input circuit
Mic E.I.N.1(20 Hz - 20 kHz)
- @ 0 Ω source resistance
- -134 dB / 135.7 dB A-weighted @ 0 Ω source resistance
- @ 50 Ω source resistance
- -131 dB / 133.3 dB A-weighted
- @ 150 Ω source resistance
- -129 dB / 130.5 dB A-weighted
Frequency Response
- ﹤10 Hz - 150 kHz
- -1 dB
- ﹤10 Hz - 200 kHz
- -3 dB
- Gain range (FR)
- +10 dB to +60 dB
- Max. input level (FR)
- +12 dBu @ +10 dB GAIN
- Impedance (FR)
- approx. 2.6 kΩ balanced
- S/N ratio
- 110 dB / 112 dB A-weighted (0 dBu In @ +22 dB GAIN)
- Distortion (THD + N)
- 0.005% / 0.004% A-weighted
Line Input
- Line Input Type
- 1⁄4" TRS jack, electronically balanced
- Impedance (LI)
- Approx. 20 kΩ balanced
Approx. 10 kΩ unbalanced - Gain range (LI)
- -10 dB to +40 dB
- Max. input level (LI)
- +22 dBu @ 0 dB GAIN
Fade-Out Attenuation2 (Crosstalk Attenuation)
- Main fader closed
- 90 dB
- Channel muted
- 89.5 dB
- Channel fader muted
- 89 dB
Frequency Response (Mic In → Main Out)
- ﹤10 Hz - 90 kHz
- +0 dB / -1 dB
- ﹤10 Hz - 160 kHz
- +0 dB / -3 dB
Stereo Inputs
- Stereo Inputs Type
- 1⁄4" TRS jack, electronically balanced
- Impedance (StI)
- Approx. 20 kΩ
- Max. input level (StI)
- +22 dBu
Equalizer
- EQ Mono Channels
- LOW - 80 Hz / ±15 dB
MID - 2.5 kHz / ±15 dB
HIGH - 12 kHz / ±15 dB - EQ Stereo Channels
- LOW - 80 Hz / ±15 dB
MID - 2.5 kHz / ±15 dB
HIGH - 12 kHz / ±15 dB